




Half of the homes in Lawrenceville were built in 1987 or earlier, according to the Census Bureau, and that age shows up the moment a pipe lets go or a water heater splits. Older copper, older supply lines, slab foundations that have shifted a little over the decades. None of that is a problem until it is, and when it is, it is usually water on a floor at an inconvenient hour. We answer calls 24/7 for exactly that reason.
A home built around 1987, or earlier, has had decades for its plumbing, caulking, and flashing to age. Supply lines corrode from the inside where you cannot see them. Wax rings on toilets dry out. Galvanized pipe, if it is still in the house, narrows over time and can fail at a joint with no warning.
About 31% of Lawrenceville’s housing stock predates 1980, which pushes the age question further back for a meaningful share of the city. Older construction also tends to mean plaster or early drywall, older subfloor adhesives, and insulation types that hold water differently than what gets installed today. None of that is a verdict on any one house. It just means the materials behind the walls have had more time to wear, and a leak that would be a minor nuisance in a five-year-old house can sit and soak into original subfloor in an older one before anyone notices.
The work starts with getting the water out, not talking about getting the water out. That means emergency water removal and extraction with pumps and extraction tools suited to the amount of water and the flooring involved.
From there we pull out what cannot be saved. Soaked carpet pad, swollen baseboard, drywall that has wicked water past the point of drying out cleanly. Leaving ruined material in place just feeds mold growth and slows everything after it.
Then equipment goes in. Air movers and dehumidifiers get set and positioned based on the room, not just dropped in the middle of the floor. We take moisture readings in the affected materials and keep taking them, on a schedule, until the readings say the structure is actually dry, not just dry to the touch. The goal through all of it is stopping further damage before any repair work starts, because repairing over a still-wet wall cavity is just setting up a second job.
The work follows the IICRC S500, which is the industry standard for water damage restoration. In practical terms for a homeowner, that standard is what tells a technician how many drying days to expect, where to take moisture readings, and when a space is actually dry rather than just looking dry. It is not a guess based on experience alone.
Timing matters more than people expect. The EPA states that water-damaged areas and materials dried within 24 to 48 hours will, in most cases, not grow mold. Past that window, the odds shift. That is the real argument for calling at 2 a.m. instead of waiting for business hours; a few hours inside that window can be the difference between a drying job and a mold job.
One thing you can check yourself today, especially if your house falls into that pre-1987 group: look at the supply line under your water heater and under your washing machine for any green or white crust, or a damp spot on the floor nearby. That is often the first visible sign of a slow failure, well before anything dramatic happens.
About 49% of occupied homes in Lawrenceville are owner-occupied, with the rest rented. That split changes some practical things on a job. An owner can usually authorize work and talk to their insurance adjuster directly. A renter typically has to loop in a property manager or landlord before equipment goes in, which can add a step to an already stressful morning. If you rent and you’ve got water coming in, having the landlord’s contact information ready when you call speeds things along.
For insurance purposes, adjusters often want to know whether a loss is sudden and accidental, like a burst pipe, versus gradual, like a slow leak that has been going on for a while behind a wall. That distinction affects how a claim gets evaluated, though what a given policy actually covers is between the homeowner and their insurer. We document moisture levels and the condition of materials as we find them, which gives whoever is handling the claim something concrete to work from.
We answer calls 24/7, and in an emergency a Committed Restoration crew typically arrives within the hour for Lawrenceville jobs. Night or day, the steps are the same: get the water out, assess what can be saved, and start drying.
Water mitigation is the work that stops further damage and gets a structure dry: emergency extraction, removing wet materials that can’t be saved, setting drying equipment, and taking moisture readings until the structure is dry. Restoration is the rebuilding that comes after, once mitigation is finished.
Drywall wicks water upward like a paper towel, and once it’s saturated past a certain point it won’t dry out cleanly on its own, so removing the wet section is often part of removing materials that cannot be saved. It also lets us get moisture readings and airflow into the wall cavity itself, not just the room.
It can. Homes built before 1980 make up about 31% of Lawrenceville’s housing, and older subfloor, insulation, and plumbing can hold or hide water differently than newer materials. We still take moisture readings under the IICRC S500 standard regardless of the home’s age, but an older house may need longer monitoring in certain spots before it’s clear.
The EPA says materials dried within 24 to 48 hours will, in most cases, not grow mold, so the first day or two after a leak matters more than anything that happens later. That’s the practical reason to call as soon as you find water rather than waiting to see if it dries on its own.
Sources: US Census Bureau, American Community Survey 2023 5-year estimates; IICRC, ANSI/IICRC S500 Standard; US EPA, A Brief Guide to Mold, Moisture and Your Home. Read 2026-11-14.